Netti S

Readable scales and pictograms make operation easier. Red marked adjustment elements and easy driving make handling easy.

Ergonomic, height adjustable push bar which can be easily
folded to decrease total length in narrow spaces or when the carer needs to get closer to the user. Available in 2 lengths.

The arm support can be lowered below the cushion level for easy transfer. Readable scale for adjusting height.

Repositioning shifts pressure peak points; thus pressure relief can be achieved.

Netti S allows for frequent repositioning of the child or youngster with a tilt range optimized for both activities (-3°) and relaxation (35°).

Seat depth flexibility: 250-450 mm

The seat plate of the chair can be adjusted by up to 100 mm in depth without use of extra parts (seat width 250 mm however only 75 mm), thereby ensuring the growing child a good seating comfort.

The Netti S in seat width 350 mm can be adjusted from 250 to 440 mm using a 90 mm seat plate extender.

Seat width that supports growth: -70 mm

Pelvis stability is important to create a stable seating position. The seat width reduction pads secure the stability by reducing the seat with by 0 to 70 mm. This also gives room for growth.

Flexible leg length: 220-390 mm

The stability of the pelvis starts at the feet. If you want to secure an optimum stability it’s important to secure a good basis for the feet. Therefore the Netti leg support ensures maximum flexibility. The lower leg length of the standard leg support can be adjusted from 220 to 320 mm. With the angle adjustable foot support you can even reach 390 mm.

Back height accommodation: 400-600 mm

Netti S is supplied with adjustable back straps allowing you to adjust the back to the exact shape of the child’s back. The back cushion has a height of 400 mm and can be adjusted up to 500 mm. To provide additional support for taller users, a back extender of 100 mm is offered providing a back height of 500-600 mm.

Involuntary movements often cause challenges for wheelchair users as well as the care givers. When sliding forward and loosing the correct position, the risk of skin damage, discomfort as well as the need of repositioning are increased.

This can be accommodated by offering the user dynamic seating solutions. The dynamic version of Netti S, Netti Dynamic S, is suitable for restless users, users that would like to move the body a bit themselves or users with extension spasm or involuntary movement of the hip/back.

Netti Dynamic S:

- Dynamic back support
- Dynamic seat unit
- Dynamic leg support

The interaction of leg support, back and seat unit ensures a good feeling. If the user has extension movements with the legs, this also affects the angle of the hip. For this reason, it is important that the seat plate also adapts to the movement.

The essence of the Netti Dynamic System is that the user's extension movements are immediately absorbed, that is, the seat and back system as well as the leg supports accompany the involuntary activity of the user in the movement. This has the consequence that during the expansion phase increased muscle tension can be reduced and over time a reduced incidence of spasms can occur.

The wheelchair can be easily folded together and will fit in most cars.

Netti S is a multifunctional wheelchair for partially or fully immobile children and youth with physical and/or mental disabilities. Netti S has adjustable seat and back angle, thus facilitating for the change of seating position, mobilization or stabilization, wherever the following impediments are present:

• Limited or lacking mobility or movement range
• Limited or lacking muscle power
• Limited or lacking trunk and body stability
• Hemiplegia
• Rheumatic type disorder
• Craniocerebral injuries
• Amputations
• Other neurological disorders